緊固件標準查詢-國標GB

:::金蜘蛛緊固件黃頁:::

熱門分類


• 六角薄螺母	• 六角頭自攻螺釘	• 六角螺母 C級	• 平墊圈 A級
• 內六角平圓頭螺釘	• 蝶形螺母	• 鋼網架螺栓球節點用高...	• 六角頭螺栓
• 內六角沉頭螺釘	• 蓋形螺母	• 十字槽盤頭自攻螺釘	• 六角法蘭面螺栓小系列
• 標準型彈簧墊圈	• 六角頭螺栓全螺紋	• 螺桿	• 六角法蘭面螺母
• 活節螺栓	• 圓錐銷	• 六角厚螺母	• 開槽圓柱頭螺釘
• 方螺母 C級	• 六角頭頭部帶槽螺栓 ...	• 半圓頭方頸螺栓	• 內六角凹端緊定螺釘
• 銷軸	• 六角頭鉸制孔用螺栓	• 加強半圓頭方頸螺栓	• 焊接方螺母
• 開槽凹端緊定螺釘	• 雙頭螺柱 bm=1.5d	• 開槽沉頭螺釘	• 2型非金屬嵌件六角鎖...
• 六角薄螺母無倒角	• 六角頭螺桿帶孔螺栓 ...	• 十字槽沉頭自攻螺釘	• 開槽半沉頭螺釘
• 焊接六角螺母	• 帶槽圓螺母	• 非金屬嵌件六角法蘭面...	• 組合式蓋形螺母
• 沉頭方頸螺栓	• 六角頭螺栓細牙	• 沉頭鉚螺母	• 內六角花形盤頭螺釘
• 滾花高螺母	• 2型六角螺母	• 方頭凹端緊定螺釘	• 六角開槽薄螺母細牙...

分類目錄

螺栓

--方頭螺栓 C級　UDC 621.882.6 | GB 8-88 | 代替 GB8-76
Square head bolts-Product grade C

--沉頭方頸螺栓　GB 10-2013 | 代替 GB10-1988
Countersunk head square neck bolts

--沉頭帶榫螺栓　GB 11-2013 | 代替 GB11-1988
Countersunk head nib bolts

--圓頭方頸螺栓　GB 12-2013 | 代替 GB12-1988
Cup head square neck bolts

--圓頭帶榫螺栓　GB 13-2013 | 代替 GB13-1988
Cup head nib bolts

--扁圓頭方頸螺栓　GB 14-2013 | 代替 GB14-1998
Mushroom head square neck bolts

--扁圓頭帶榫螺栓　GB 15-2013 | 代替 GB15-1988
Mushroom head nib bolts

--六角頭加強桿螺栓　GB 27-2013 | 代替 GB27-1988
Hexagon fit shank bolts

--六角頭螺桿帶孔加強桿螺栓　GB 28-2013 | 代替 GB28-1988
Hexagon fit shank bolts with split pin hole on shank

--六角頭帶槽螺栓　GB /T 29.1-2013 | 代替 GB/T 29.1-1988
Hexagon bolts with slot on head

--六角頭帶十字槽螺栓　GB /T 29.2-2013 | 代替 GB/T 29.2-1988
Hexagon bolts with cross recess on head

--六角頭螺桿帶孔螺栓　GB /T 31.1-2013 | 代替 GB/T 31.1-1988
Hexagon bolts with split pin hole on shank

--六角頭螺桿帶孔螺栓細桿 B級　UDC 621.882.6 | GB 31.2-88 | 代替 GB31-76, 23-76, 24-76
Hexagon bolts with split pin hole on shank-reduced shank-product grade B

--六角頭螺桿帶孔螺栓細牙 A和B級　UDC 621.882.6 | GB 31.3-88 | 代替 GB31-76, 23-76, 24-76
Hexagon bolts with split pin hole on shank-fine pitch thread-product grade A and B

--六角頭頭部帶孔螺栓 A級和B級　UDC 621.882.6 | GB 32.1-88 | 代替 GB32-76,25-76,26-76
Hexagon bolts with wire holes on head - product grade A and B

--六角頭頭部帶孔螺栓細桿 B級　UDC 621.882.6 | GB 32.2-88 | 代替 GB32-76,25-76,26-76
Hexagon bolts with wire holes on head -reduced shank-product grade B

--六角頭頭部帶孔螺栓細牙 A和B級　UDC 621.882.6 | GB 32.3-88 | 代替 GB32-76,25-76,26-76
Hexagon bolts with wire holes on head -fine pitch thread-product grade A and B

--小方頭螺栓　GB /T 35-2013 | 代替 GB/T 35-1988
Square head bolts with small head

--T 形槽用螺栓　UDC 621.882.6 | GB 37-88 | 代替 GB37-76
Bolts for T-Slot

--加強半圓頭方頸螺栓　GB /T 794-93 | 代替 GB/T 794-67
Strengthened cap head square neck bolts

--活節螺栓　UDC 621.882.6 | GB 798-88 | 代替 GB798-76
Eye bolts

--地腳螺栓　UDC 621.882.6 | GB 799-88 | 代替 GB799-76
Eyelet bolts

--沉頭雙榫螺栓　UDC 621.882.6 | GB 800-88 | 代替 GB800-77
Flat countersunk double nib bolts

--小半圓頭低方頸螺栓 B級　ISO 8678:1988 | GB /T 801-1988 | 代替 GB801-88
Cup head square neck bolts with small head and short neck - Product grade B

--六角法蘭面螺栓-加大系列-B級　UDC 621.882.6 | GB 5789-86 |
Hexagon flange bolts -Heavy series-Product grade B

--六角法蘭面螺栓-加大系列-細桿-B級　UDC 621.882.6 | GB 5790-86 |
Hexagon flat bolts-Heavy series-Product grade B

--六角法蘭面螺栓-小系列　GB /T 16674.1-2016 | 代替 GB/T 16674.1-2004
Hexagon bolts with flange - Small series

--六角法蘭面螺栓-細牙-小系列　ISO 15072:2012 | GB /T 16674.2-2016 | 代替 GB/T 16674.2-2004
Hexagon bolts with flange-Fine pitch thread-Small series

--鋼網架螺栓球節點用高強度螺栓　GB /T 16939-2016 | 代替 GB/T 16939-1997
High strength bolts for joints of space grid structures

--六角花形法蘭面螺栓　GB /T 35481-2017 |
Hexalobular bolts with flange

--焊接六角螺母　GB /T 13681-92 |
Hexagon weld nuts

螺柱

--雙頭螺柱 bm=1d　UDC 621.882.6 | GB 897-88 | 代替 GB897-76
Double end studs -bm=1d

--雙頭螺柱 bm=1.5d　UDC 621.882 | GB 899-88 | 代替 GB899-76
Double end studs -bm=1.5d

--雙頭螺柱 bm=2d　UDC 621.882 | GB 900-88 |
Double end studs -bm=2d

--等長雙頭螺柱 B級　UDC 621.882 | GB 901-88 | 代替 GB901-76
Double end studs(clamping type) product grade B

--手工焊用焊接螺柱　GB /T 902.1-2008 | 代替 GB/T 902.1-1989
Weld studs for manual welding

--電弧螺柱焊用焊接螺柱　ISO 13918:2008 | GB /T 902.2-2010 | 代替 GB/T 902.2-1989
Threaded studs for drawn arc stud welding with ceramic ferrule

螺母

--方螺母-C級　UDC 621.882.3 | GB 39-88 | 代替 GB39-76
Square nuts-product grade C

--1 型六角螺母C級　ISO 4034:2012 | GB /T 41-2016 | 代替 GB/T 41-2000
Hexagon nuts, style 1-products grade C

--六角厚螺母　UDC 621.882.3 | GB 56-88 | 代替 GB56-76
Hexagon thick nuts

--蝶形螺母方翼　GB /T 62.2-2004 |
Wing nuts-Square wing

--蝶形螺母沖壓　GB /T 62.2-2004 |
Wing nuts-Pressing wing

--蝶形螺母壓鑄　GB /T 62.4-2004 |
Wing nuts-Die-Casting wing

--環形螺母　UDC 621.882.3 | GB 63-88 | 代替 GB63-76
Lifting nuts

--組合式蓋形螺母　GB /T 802.1-2008 | 代替 GB/T 802-1988
Acorn nuts-Assembling type

--非金屬嵌件六角鎖緊蓋形螺母焊接型　GB /T 802.5-2009 |
Prevailing torque type hexagon acorn nuts with non-metallic insert-Welding type

--球面六角螺母　UDC 621.882.3 | GB 804-88 | 代替 GB804-76
Hexagon nuts with raised face

--扣緊螺母　UDC 621.882.3 | GB 805-88 | 代替 GB805-76
Tight nuts

--滾花高螺母　UDC 621.882.3 | GB 806-88 | 代替 GB806-76
Knurled nuts with collar

--小六角特扁細牙螺母　UDC 621.882.3 | GB 808-88 | 代替 GB808-76
Small hexagon thin nuts-fine pitch thread

--嵌裝圓螺母　UDC 621.882.3 | GB 809-88 | 代替 GB809-76
Insert round nuts

--小圓螺母　UDC 621.882.3 | GB 810-88 | 代替 GB810-76
Small round nuts

--圓螺母　UDC 621.882.3 | GB 812-88 | 代替 GB812-76
Round nuts

--端面帶孔圓螺母　UDC 621.882.3 | GB 815-88 | 代替 GB815-76
Round nuts with drilled holes in one face

--帶槽圓螺母　UDC 621.882.3 | GB 817-88 | 代替 GB817-76
Slotted round nuts

--1型非嵌件六角鎖緊螺母　ISO 7040:2012 | GB /T 889.1-2015 | 代替 GB/T 889.1-2000
Prevailing torque type hexagon nuts (with non-metallic insert),style 1

--1型非金屬嵌件六角鎖緊螺母細牙　ISO 10512:2012 | GB /T 889.2-2016 | 代替 GB/T 889.2-2000
Prevailing torque type hexagon nuts (with non-metallic insert), style1- Fine pitch thread

--六角蓋形螺母　GB /T 923-2009 | 代替 GB/T 923-1988
Acorn hexagon nuts

--1 型六角螺母　ISO 4032:2012 | GB /T 6170-2015 | 代替 GB/T 6170-2000
Hexagon nuts, style 1

--1 型六角螺母細牙　ISO 8673:2012 | GB /T 6171-2016 | 代替 GB/T 6171-2000
Hexagon nuts, style 1- Fine pitch thread

--六角薄螺母　ISO 4035:2012 | GB /T 6172.1-2016 | 代替 GB/T 6172.1-2000
Hexagon thin nuts(chamfered)

--非金屬嵌件六角鎖緊薄螺母　ISO 10511:2012 | GB /T 6172.2-2016 | 代替 GB/T 6172.2-2000
Prevailing torque type hexagon thin nuts (with non-metallic insert)

--六角薄螺母細牙　ISO 8675:2012 | GB /T 6173-2015 | 代替 GB/T 6173-2000
Hexagon thin nuts-fine pitch thread

--六角薄螺母無倒角　ISO 4036:2016 | GB /T 6174-2016 | 代替 GB/T 6174-2000
Hexagon thin nuts - unchamfered

--2 型六角螺母　ISO 4033:2012 | GB /T 6175-2016 | 代替 GB/T 6175-2000
Hexagon nuts, style 2

--2 型六角螺母細牙　ISO 8674:2012 | GB /T 6176-2016 | 代替 GB/T 6176-2000
Hexagon nuts, style 2 -Fine pitch thread

--2型六角法蘭面螺母　ISO 4161:2012 | GB /T 6177.1-2016 | 代替 GB/T 6177.1-2000
Hexagon nuts with flange, style 2

--2型六角法蘭面螺母細牙　ISO 10663:2012 | GB /T 6172.1-2016 | 代替 GB/T 6172.1-2000
Hexagon nuts with flange, style 2-Fine pitch thread

--1型六角開槽螺母-C級　UDC 621.882.3 | GB 6179-86 | 代替 GB57-58-76
Hexagon slotted nuts,style 1-Product grade C

--2型六角開槽螺母-A和B級　UDC 621.882.3 | GB 6180-86 |
Hexagon slotted and castle nuts, style 2,product grades A and B

--六角開槽薄螺母-A和B級　UDC 621.882.3 | GB 6181-86 | 代替 GB59-60-76
Hexagon thin slotted nuts - product grades A and B

--2 型非金屬嵌件六角鎖緊螺母　ISO 7041:2012 | GB /T 6182-2016 | 代替 GB/T 6182-2010
Prevailing torque type hexagon nuts (with non-metallic insert)-style 2

--2型非金屬嵌件六角法蘭面鎖緊螺母　ISO 7043:2012 | GB /T 6183.1-2016 | 代替 GB/T 6183.1-2000
Prevailing torque type hexagon nuts with flange (with non-metallic insert)-style 2

--2 型非金屬嵌件六角法蘭面鎖緊螺母細牙　GB /T 6183.2-2016 | 代替 GB/T 6183.2-2000
Prevailing torque type hexagon nuts with flange (with non-metallic insert)-style 2, fine pitch thread

--1 型全金屬六角鎖緊螺母　ISO 7719:1997 | GB /T 6184-2000 | 代替 GB/T 6184-1986
Prevailing torque type all - metal hexagon nuts, style 1

--2型全金屬六角鎖緊螺母　ISO 7042:2012 | GB /T 6185.1-2016 | 代替 GB/T 6185.1-2000
Prevailing torque type all-metal hexagon nuts, style 2

--2 型全金屬六角鎖緊螺母細牙　ISO 10513:2012 | GB /T 6185.2-2016 | 代替 GB/T 6185.2-2000
Prevailing torque type all metal hexagon nuts, style 2 - fine pitch thread

--2 型全金屬六角法蘭面鎖緊螺母　ISO 7044:2012 | GB /T 6187.1-2016 | 代替 GB/T 6187.1-2000
Prevailing torque type all metal hexagon nuts with flange, style 2

--2 型全金屬六角法蘭面鎖緊螺母,細牙　GB /T 6187.2-2016 | 代替 GB/T 6187.2-2000
Prevailing torque type all metal hexagon nuts with flange, style 2，fine pitch thread

--1型六角開槽螺母細牙 A級和B級　UDC 621.882.3 | GB 9457-88 | 代替 GB57-76, 58-76
Hexagon slotted and castle nuts, style 1-fine pitch thread, product grades A and B

--2型六角開槽螺母細牙 A 級和B 級　UDC 621.882.3 | GB 9458-88 |
Hexagon slotted and castle nuts, style 2-fine pitch thread, product grades A and B

--六角開槽薄螺母細牙 A 和B 級　UDC 621.882.3 | GB 9459-88 | 代替 GB59-76, 60-76
Hexagon thin slotted nuts -fine pitch thread, Product grades A and B

--焊接方螺母　GB /T 13680-92 |
Square weld nuts

--焊接六角法蘭面螺母　ISO 21670:2014 | GB /T 13681.2-2017 | 代替 GB/T 13681.2-2010
Hexagon weld nuts with flange

--平頭鉚螺母　GB /T 17880.1-1999 |
Flat head riveted nuts

--沉頭鉚螺母　GB /T 17880.2-1999 |
Countersunk head riveted nuts

--小沉頭鉚螺母　GB /T 17880.3-1999 |
Small countersunk head riveted nuts

--120°小沉頭鉚螺母　GB /T 17880.4-1999 |
120°Small countersunk head riveted nuts

--平頭六角鉚螺母　GB /T 17880.5-1999 |
Flat head hexagon riveted nuts

--精密機械用六角螺母　ISO 4166:1979 | GB /T 18195-2000 |
Hexagon nuts for fine machanics

--普通型鋼絲螺套　GB /T 24425.1-2009 |
General type wire thread inserts

--鎖緊型鋼絲螺套　GB /T 24425.3-2009 |
Prevailing torque type wire thread inserts

--鎖緊型盲孔用鋼絲螺套　GB /T 24425.4-2009 |
Prevailing torque type wire thread inserts for blind hole

--吊環螺母　GB /T 7382-94 |
Eye nuts

螺釘

--開槽沉頭螺釘　ISO 2009:2011 | GB /T 68-2016 | 代替 GB/T 68-2000
Slotted countersunk flat head screws

--開槽半沉頭螺釘　GB /T 69-2016 |
Countersunk slotted raised head screws (common head style)

--內六角圓柱頭螺釘　ISO 4762:2004 | GB /T 70.1-2008 | 代替 GB/T 70.1-2000
Hexagon socket head cap screws

--內六角平圓頭螺釘　ISO 7380-1:2011 | GB /T 70.2-2015 | 代替 GB/T 70.2-2008
Hexagon socket button head screws

--內六角沉頭螺釘　ISO 10642:2004 | GB /T 70.3-2008 | 代替 GB/T 70.3-2000
Hexagon socket countersunk head screws

--內六角平圓頭凸緣螺釘　ISO 7380-2:2011 | GB /T 70.4-2015 |
Hexagon socket button head screws with collar

--開槽錐端緊定螺釘　ISO 7434:1983 | GB /T 71-2018 | 代替 GB/T 71-1985
Slotted set screws with cone point

--開槽錐端定位螺釘　UDC 621.882.2 | GB 72-88 | 代替 GB72-76
Slotted setscrews with cone point

--開槽平端緊定螺釘　ISO 4766:2011 | GB /T 73-2017 | 代替 GB/T 73-1985
Slotted set screws with flat point

--開槽凹端緊定螺釘　ISO 7436:1983 | GB /T 74-2018 | 代替 GB/T 74-1985
Slotted set screws with cup point

--開槽長圓柱端緊定螺釘　ISO 7435:1983 | GB /T 75-2018 | 代替 GB/T 75-1985
Slotted set screws with long dog point

--內六角平端緊定螺釘　ISO 4026:2003 | GB /T 77-2007 | 代替 GB/T 77-2000
Hexagon socket set screws with flat point

--內六角錐端緊定螺釘　ISO 4027:2003 | GB /T 78-2007 | 代替 GB/T 78-2000
Hexagon socket set screws with cone point

--內六角圓柱端緊定螺釘　ISO 4028:2003 | GB /T 79-2007 | 代替 GB/T 79-2000
Hexagon socket set screws with dog point

--內六角凹端緊定螺釘　ISO 4029:2003 | GB /T 80-2007 | 代替 GB/T 80-2000
Hexagon socket set screws with cup point

--方頭長圓柱球面端緊定螺釘　GB /T 83-2018 | 代替 GB/T 83-1988
Square set screws with long dog point and rounded end

--方頭凹端緊定螺釘　GB /T 84-2018 | 代替 GB/T 84-1988
Square set screws with cup point

--方頭長圓柱端緊定螺釘　GB /T 85-2018 | 代替 GB/T 85-1988
Square set screws with long dog point

--方頭短圓柱錐端緊定螺釘　GB /T 86-2018 | 代替 GB/T 86-1988
square set screws with short dog point and cone end

--十字槽盤頭螺釘　ISO 7045：2011 | GB /T 818-2016 | 代替 GB/T 818-2000
Pan head screws with cross recess

--十字槽沉頭螺釘第一部分4.8級　ISO 7046-1:2011 | GB /T 819.1-2016 | 代替 GB/T 819.1-2000
Countersunk flat head screws with cross recess-Part 1:Property class 4.8

--十字槽沉頭螺釘第二部分 8.8級，不銹鋼及有色金屬螺釘　ISO 7046-2:2011 | GB /T 819.2-2016 | 代替 GB/T 819.2-1997
Countersunk flat head screws with cross recess- Part 2: Property class 8.8, stainless steel screws and non ferrous metal screws

--十字槽半沉頭螺釘　ISO 7047:2011 | GB /T 820-2015 | 代替 GB/T 820-2000
Raised countersunk head screws with cross recess

--方頭平端緊定螺釘　GB /T 821-2018 | 代替 GB/T 821-1988
Square set screws with chamfered end

--開槽盤頭定位螺釘　UDC 621.882.2 | GB 828-88 | 代替 GB828-76
Slotted pan head set setscrews with dog point

--開槽圓柱端定位螺釘　UDC 621.882.2 | GB 829-88 | 代替 GB829-76
Slotted setscrews with dog point

--開槽圓柱頭軸位螺釘　UDC 621.882.2 | GB 830-88 | 代替 GB830-76
Slotted cheese head screws with shoulder

--開槽無頭軸位螺釘　UDC 621.882.2 | GB 831-88 | 代替 GB831-76
Slotted shoulder screws

--開槽帶孔球面圓柱頭螺釘　UDC 621.882.2 | GB 832-88 | 代替 GB832-76
Slotted capstan screws

--開槽大圓柱頭螺釘　UDC 621.882.2 | GB 833-88 | 代替 GB833-76
Slotted large cheese head screws

--滾花高頭螺釘　UDC 621.882.2 | GB 834-88 | 代替 GB834-76
knurled thumb screws

--滾花平頭螺釘　UDC 621.882.2 | GB 835-88 | 代替 GB835-76
Knurled screws

--開槽盤頭不脫出螺釘　UDC 621.882.2 | GB 837-88 | 代替 GB837-76
Slotted pan head screws with waisted shank

--六角頭不脫出螺釘　UDC 621.882.2 | GB 838-88 | 代替 GB838-76
Hexagon screws with waisted shank

--滾花頭不脫出螺釘　UDC 621.882.2 | GB 839-88 | 代替 GB839-76
Knurled thumb screws with waisted shank

--塑料滾花頭螺釘　UDC 621.882.2 | GB 840-88 | 代替 GB840-79
Plastic diamond knurl head screws

--開槽無頭螺釘　UDC 2342:2003 | GB /T 878-2007 | 代替 GB/T 878-1986
Slotted headless screws with shank

--開槽球面圓柱頭軸位螺釘　UDC 621.882.2 | GB 946-88 | 代替 GB946-76
Slotted raised cheese head with shoulder

--開槽球面大圓柱頭螺釘　UDC 621.882.2 | GB 947-88 | 代替 GB947-76
Slotted large raised cheese head screws

--開槽沉頭不脫出螺釘　UDC 621.882.2 | GB 948-88 | 代替 GB948-76
Slotted countersunk head screws with waisted shank

--開槽半沉頭不脫出螺釘　UDC 621.882.2 | GB 949-88 | 代替 GB949-76
Slotted raised countersunk head screws with waisted shank

--內六角花形低圓柱頭螺釘　UDC 14580:2011 | GB /T 2671.1-2017 | 代替 GB/T 2671.1-2004
Hexalobular socket cheese(short) head screws

--內六角花形圓柱頭螺釘　ISO 14579:2011 | GB /T 2761.2-2017 | 代替 GB/T 2761.2-2004
Hexalobular socket head cap screws

--內六角花形盤頭螺釘　ISO 14583:2011 | GB /T 2672-2017 | 代替 GB/T 2672-2004
Hexalobular socket pan head screws

--內六角花形沉頭螺釘　ISO 14581:2013 | GB /T 2673.1-2018 | 代替 GB/T 2673-2007
Hexalobular socket countersunk flat head screws

--內六角花形半沉頭螺釘　ISO 14584:2011 | GB /T 2674-2017 | 代替 GB/T 2674-2004
Hexalobular socket raised countersunk head screws

--內六角圓柱頭軸肩螺釘　UDC 621.882.215.6 | GB 5281-85 |
Hexagon socket head shoulder screws

--精密機械用緊固件十字槽螺釘　GB /T 13806.1-92 |
Fasteners for fine mechanics-Cross recessed screws

--平頭環槽釘　GB /T 6361.1-92 |
Panhead ring groove nails

--沉頭環槽釘　GB 6361.2-92 |
Countersunk ring groove nails

--平頭螺旋槽釘　GB /T 6361.3-92 |
Flat Head Spiral Grooved Nail

--沉頭螺旋槽釘　GB /T 6361.4-92 |
Countersunk Spiral Grooved Nail

木螺釘

--開槽圓頭木螺釘　UDC 621.882.2 | GB 99-86 | 代替 GB99-76
Slotted round head wood screws

--開槽沉頭木螺釘　UDC 621.882.2 | GB 100-86 | 代替 GB100-76
Slotted countersunk head wood screws

--開槽半沉頭木螺釘　UDC 621.882.2 | GB 101-86 | 代替 GB101-76
Slotted raised countersunk head wood screws

--六角頭木螺釘　UDC 621.882.2 | GB 102-86 | 代替 GB102-76
Hexagon head wood screws

--十字槽圓頭木螺釘　UDC 621.882.2 | GB 950-86 | 代替 GB950-76
Cross recessed round head wood screws

--十字槽沉頭木螺釘　UDC 621.882.2 | GB 951-86 | 代替 GB951-76
Cross recessed countersunk head wood screws

--十字槽半沉頭木螺釘　UDC 621.882.2 | GB 952-86 | 代替 GB952-76
Cross recessed raised countersunk head wood screws

自攻螺釘

--十字槽盤頭自攻螺釘　ISO 7049:2011 | GB /T 845-2017 | 代替 GB/T 845-1985
Cross-recessed pan head tapping screws

--十字槽沉頭自攻螺釘　ISO 7050:2011 | GB /T 846-2017 | 代替 GB/T 846-1985
Cross-recessed countersunk (flat) head tapping screws

--十字槽半沉頭自攻螺釘　ISO 7051:2011 | GB /T 847-2017 | 代替 GB/T 847-1985
Cross recessed raised countersunk(oval) head tapping screws

--內六角花形盤頭自攻螺釘　ISO 14585:2011 | GB /T 2670.1-2017 | 代替 GB/T 2670.1-2004
Hexalobular socket pan head tapping screws

--內六角花形沉頭自攻螺釘　ISO 14586:2011 | GB /T 2670.2-2017 | 代替 GB/T 2670.2-2004
Hexalobular socket countersunk head tapping screws

--內六角花形半沉頭自攻螺釘　ISO 14587:2011 | GB /T 2670.3-2017 | 代替 GB/T 2670.3-2004
Hexalobular socket raised countersunk(oval) head tapping screws

--開槽盤頭自攻螺釘　ISO 1481:2011 | GB /T 5282-2017 | 代替 GB/T 5282-1985
Slotted pan head tapping screws

--開槽沉頭自攻螺釘　ISO 1482:2011 | GB /T 5283-2017 | 代替 GB/T 5283-1985
Slotted countersunk flat head tapping screws

--開槽半沉頭自攻螺釘　ISO 1483:2011 | GB /T 5284-2017 | 代替 GB/T 5284-1985
Slotted raised countersunk(oval) head tapping screws

--六角頭自攻螺釘　ISO 1479:2011 | GB /T 5285-2017 | 代替 GB/T 5285-1985
Hexagon head tapping screws

--十字槽盤頭自擠螺釘　GB /T 6560-2014 | 代替 GB/T 6560-1986
Cross recessed pan head thread rolling screws

--十字槽沉頭自擠螺釘　GB /T 6561-2014 | 代替 GB/T 6561-1986
Cross recessed countersunk head thread rolling screws

--十字槽半沉頭自擠螺釘　GB /T 6562-2014 | 代替 GB/T 6562-1986
Cross recessed raised countersunk head thread rolling screws

--六角頭自擠螺釘　GB /T 6563-2014 | 代替 GB/T 6563-1986
Hexagon head thread rolling screws

--內六角花形圓柱頭自擠螺釘　GB /T 6564.1-2014 | 代替 GB/T 6564.1-1986
Hexalobular socket head cap thread rolling screws

--十字槽凹穴六角頭自攻螺釘　UDC 621.882.2 | GB 9456-88 |
Cross recessed hexagon head tapping screws with indentation

--精密機械用緊固件十字槽自攻螺釘刮削端　GB /T 13806.2-92 |
Fasteners for fine mechanics- Cross recessed tapping screws -Crape point

--墻板自攻螺釘　GB /T 14210-93 |
Dry wall screws

--十字槽盤頭自鉆自攻螺釘　ISO 15481:1999 | GB /T 15856.1-2002 | 代替 GB/T 15856.1-1995
Cross recessed pan head drilling screws with tapping screw thread

--十字槽沉頭自鉆自攻螺釘　GB /T 15856-2002 | 代替 GB/T 15856-1995
Cross recessed countersunk head drilling screws with tapping screw thread

--十字槽半沉頭自鉆自攻螺釘　GB /T 15856.3-2002 | 代替 GB/T 15856.3-1995
Cross recessed raised countersunk head drilling screws with tapping screw thread

--六角法蘭面自鉆自攻螺釘　GB /T 15856.4-2002 | 代替 GB/T 15856.4-1995
Hexagon flange head drilling screws with tapping screw thread

--六角凸緣自鉆自攻螺釘　ISO 15480：1999 | GB /T 15856.5-2002 |
Hexagon washer head drilling screws with tapping screw thread

--六角凸緣自攻螺釘　ISO 7053:2011 | GB /T 16824.1-2016 | 代替 GB/T 16824.1-1997
Hexagon washer head tapping screws

--六角法蘭面自攻螺釘　ISO 10509:2012 | GB /T 16824.2-2016 | 代替 GB/T 16824.2-1997
Hexagon flange head tapping screws

墊圈

--標準型彈簧墊圈　UDC 621.882.4 | GB 93-87 | 代替 GB93-76
Single coil spring lock washer, Normal type

--平墊圈C級　ISO 7091:2000 | GB /T 95-2002 | 代替 GB/T 95-1985
Plain washers - Product grade C

--大墊圈A級　ISO 7093-1:2000 | GB /T 96.1-2002 | 代替 GB/T 96-1985
Plain washer - Large series -Product grade A

--大墊圈C級　ISO 7093-2:2000 | GB /T 96.2-2002 | 代替 GB/T 96-21985
Plain washer - Large series -Product grade C

--平墊圈A級　ISO 7089:2000 | GB /T 97.1-2002 | 代替 GB/T 97.1-1985
Plain washers -Product grade A

--平墊圈-倒角型-A級　ISO 7090:2000 | GB /T 97.2-2002 | 代替 GB/T 97.2-1985
Plain washer - Chamfered -Product grade A

--銷軸用平墊圈　ISO 8738:1986 | GB /T 97.3-2000 |
Plain washers for clevis pins

--平墊圈用于螺釘和墊圈組合件　ISO 10673:1998 | GB /T 97.4-2002 | 代替 GB/T 9074.24-1988, 9074.25-1988
Plain washers for screw and washer assemblies

--平墊圈用于自攻螺釘和墊圈組合件　ISO 10669:1999 | GB /T 97.5-2002 | 代替 GB/T 9074.29-1988, 9074.30-1988
Plain washers for tapping screw and washer assemblies

--小墊圈 A級　ISO 7092:2000 | GB /T 848-2002 | 代替 GB/T 848-1985
Plain washer - Small series -Product grade A

--外齒鎖緊墊圈　UDC 621.882.4 | GB 862.1-87 | 代替 GB862-76
Lock washers external teeth

--外鋸齒鎖緊墊圈　UDC 621.882.4 | GB 862.2-87 |
Serrated lock washers external teeth

--波形彈性墊圈　UDC 621.882.4 | GB 955-87 | 代替 GB955-76
Wave spring washers

--錐形鎖緊墊圈　UDC 621.882.4 | GB 956.1-87 | 代替 GB956-76
Countersunk external toothed lock washers

--錐形鋸齒鎖緊墊圈　UDC 621.882.4 | GB 956.2-87 |
Countersunk serrated external toothed lock washers

--錐形彈性墊圈　GB /T 956.3-2017 |
Conical spring washers

--特大墊圈 C級　ISO 7094:2000 | GB /T 5287-2002 | 代替 GB/T 5287-1985
Plain washer - Extra large series -Product grade C

--重型彈簧墊圈　UDC 621.882.4 | GB 7244-87 |
Single coil spring lock washer, Heavy type

--鞍形彈簧墊圈　UDC 621.882.4 | GB 7245-87 |
Curved single coil spring washers

--波形彈簧墊圈　UDC 621.882.4 | GB 7246-87 |
Wave single coil spring lock washers

銷

--開口銷　ISO 1234:1997 | GB /T 91-2000 | 代替 GB/T 91-1986
Split pins

--圓錐銷　ISO 2339:1986 | GB /T 117-2000 | 代替 GB/T 117-1986
Taper pins

--內螺紋圓錐銷　ISO 8736:1986 | GB /T 118-2000 | 代替 GB/T 118-1986
Taper pins with internal thread

--圓柱銷不淬硬鋼和奧氏體不銹鋼　ISO 2338:1997 | GB /T 119.1-2000 | 代替 GB/T 119-1986
Parallel pins of unhardened steel and austenitic stainless steel

--圓柱銷淬硬鋼和馬氏體不銹鋼　ISO 8734:1997 | GB /T 119.2-2000 | 代替 GB/T 119-1986
Parallel pins, of hardened steel and martensitic stainless steel(Dowel pins)

--內螺紋圓柱銷不淬硬鋼和奧氏體不銹鋼　ISO 8733:1997 | GB /T 120.1-2000 | 代替 GB/T 120-1986
Parallel pins, of hardened steel and austenitic stainless steel

--內螺紋圓柱銷淬硬鋼和奧氏體不銹鋼　ISO 8735:1997 | GB /T 120.2-2000 | 代替 GB/T 120-1986
Parallel pins with internal thread, of hardened steel and martensitic stainless steel

--開尾圓柱銷　UDC 621.886 | GB 877-86 | 代替 GB877-76
Taper pins with split

--彈性圓柱銷直槽重型　ISO 8752:2009 | GB /T 879.1-2018 | 代替 GB/T 879.1-2000
Spring type straight pins - Slotted-Heavy duty

--彈性圓柱銷直槽輕型　ISO 13337:2009 | GB /T 879.2-2018 | 代替 GB/T 879.2-2000
Spring type straight pins - Slotted- Light duty

--彈性圓柱銷卷制重型　ISO 8748:2007 | GB /T 879.3-2018 | 代替 GB/T 879.3-2000
Spring type straight pins - Coiled- Heavy duty

--彈性圓柱銷卷制標準型　ISO 8750:2007 | GB /T 879.4-2018 | 代替 GB/T 879.4-2000
Spring type straight pins - Coiled- Standard duty

--彈性圓柱銷卷制輕型　ISO 8751:2001 | GB /T 879.5-2018 | 代替 GB/T 879.5-2000
Spring type straight pins - Coiled- Light duty

--無頭銷軸　ISO 2340:1986 | GB /T 880-2008 | 代替 GB/T 880-1986
Clevis pins without head

--螺尾錐銷　ISO 8737:1986 | GB /T 881-2000 | 代替 GB/T 881-1986
Taper pins with external thread

--銷軸　ISO 2341:1986 | GB /T 882-2008 | 代替 GB/T 882-1986
Clevis pins with head

--槽銷帶導桿及全長平行溝槽　ISO 8739:1997 | GB /T 13829.1-2004 | 代替 GB/T 13829.1-1992 A型
Grooved pins- Full length parallel grooved, with pilot

--槽銷帶倒角及全長平行溝槽　ISO 8740:1997 | GB /T 13829.2-2004 | 代替 GB/T 13829.1-1992 B型
Grooved pins- full length parallel grooved, with chamfer

--槽銷中部槽長為1/3全長　ISO 8742:1997 | GB /T 13829.3-2004 | 代替 GB/T 13829.1-1992 C型
Grooved pins- one- third - length centre grooved

--槽銷中部槽長為1/2全長　ISO 8743:1997 | GB /T 13829.4-2004 | 代替 GB/T 13829.1-1992 D型
Grooved pins- Half - length centre grooved

--槽銷全長錐槽　ISO 8744:1997 | GB /T 13829.5-2004 | 代替 GB/T 13829.2-1992 A型
Grooved pins- full-length taper grooved

--槽銷半長錐槽　ISO 8745:1997 | GB /T 13829.6-2004 | 代替 GB/T 13829.2-1992 B型
Grooved pins- Half - length taper grooved

--槽銷半長倒錐槽　ISO 8741:1997 | GB /T 13829.7-2004 | 代替 GB/T 13829.2-1992 C型
Grooved pins- Half - length reverse-taper grooved

--圓頭槽銷　ISO 8746:1997 | GB /T 13829.8-2004 | 代替 GB/T 13829.3-1992 A型
grooved pins with round head

--沉頭槽銷　ISO 8747:1997 | GB /T 13829.9-2004 | 代替 GB/T 13829.3-1992 B型
grooved pins with countersunk head

鉚釘

--平頭鉚釘　UDC 621.884 | GB 109-86 | 代替 GB109-76
Flat head rivets

--標牌鉚釘　UDC 621.884 | GB 827-86 | 代替 GB827-76
Rivets for name plate

--半圓頭鉚釘（粗制）　UDC 621.884 | GB 863.1-86 | 代替 GB863-76
Round head rivets -Black

--小半圓頭鉚釘（粗制）　UDC 621.884 | GB 863.2-86 |
Round head rivets with small head - Black

--平錐頭鉚釘（粗制）　UDC 621.884 | GB 864-86 | 代替 GB864-76
Cone head rivets - Black

--沉頭鉚釘（粗制）　UDC 621.884 | GB 865-86 | 代替 GB865-76
Countersunk head rivets - Black

--半沉頭鉚釘（粗制）　UDC 621.884 | GB 866-86 | 代替 GB866-76
Oval countersunk head rivets - Black

--半圓頭鉚釘　UDC 621.884 | GB 867-86 | 代替 GB867-76
Round head rivets

--平錐頭鉚釘　UDC 621.884 | GB 868-86 | 代替 GB868-76
Cone head rivets

--沉頭鉚釘　UDC 621.884 | GB 869-86 | 代替 GB869-76
Countersunk head rivets

--半沉頭鉚釘　UDC 621.884 | GB 870-86 | 代替 GB870-76
Oval countersunk head rivets

--扁圓頭鉚釘　UDC 621.884 | GB 871-86 | 代替 GB871-76
Flat round head rivets

--扁平頭鉚釘　UDC 621.884 | GB 872-86 | 代替 GB872-76
Thin head rivets

--扁圓頭半空心鉚釘　UDC 621.884 | GB 873-86 | 代替 GB873-76
Oval head semi-tubular rivets

--120°沉頭半空心鉚釘　UDC 621.884 | GB 874-86 | 代替 GB874-76
120 degree countersunk head semi-tubular rivets

--扁平頭半空心鉚釘　UDC 621.884 | GB 875-86 | 代替 GB875-76
Thin head semi-tubular rivets

--空心鉚釘　UDC 621.884 | GB 876-86 | 代替 GB876-76
Tubular rivets

--120°沉頭鉚釘　UDC 621.884 | GB 954-86 | 代替 GB954-76
120 degree countersunk head rivets

--大扁圓頭鉚釘　UDC 621.884 | GB 1011-86 | 代替 GB1011-76
Truss head rivets

--120°半沉頭鉚釘　UDC 621.884 | GB 1012-86 | 代替 GB1012-76
120 degree oval countersunk rivets

--平錐頭半空心鉚釘　UDC 621.884 | GB 1013-86 | 代替 GB1013-76
Cone head semi-tubular rivets

--大扁圓頭半空心鉚釘　UDC 621.884 | GB 1014-86 | 代替 GB1014-76
Truss head semi-tubular rivets

--沉頭半空心鉚釘　UDC 621.884 | GB 1015-86 | 代替 GB1015-76
Countersunk head semi-tubular rivets

--無頭鉚釘　UDC 621.884 | GB 1016-86 | 代替 GB1016-76
Headless rivets

--扁圓頭擊芯鉚釘　GB T 15855.1-1995 |
Flat round head drive rivets

--沉頭擊芯鉚釘　GB T 15855.2-1995 |
Countersunk head drive rivets

--封閉型平圓頭抽芯鉚釘 11級　ISO 15973:2002 | GB T 12615.1-2004 | 代替 GBT 12615-1990
Closed end blind rivets with break pull mandrel and protruding head-Property class 11

--封閉型平圓頭抽芯鉚釘 30級　ISO 15976:2002 | GB T 12615.2-2004 | 代替 GBT 12615-1990
Closed end blind rivets with break pull mandrel and protruding head-Property class 30

--封閉型平圓頭抽芯鉚釘 06級　ISO 15975:2002 | GB T 12615.3-2004 | 代替 GBT 12615-1990
Closed end blind rivets with break pull mandrel and protruding head-Property class 06

--封閉型平圓頭抽芯鉚釘 51級　ISO 16585:2002 | GB T 12615.4-2004 | 代替 GBT 12615-1990
Closed end blind rivets with break pull mandrel and protruding head-Property class 51

--封閉型沉頭抽芯鉚釘 11級　ISO 15974:2000 | GB T 12616.1-2004 | 代替 GBT 12616-1990
Closed end blind rivets with break pull mandrel and countersunk head-Property class 11

--開口型沉頭抽芯鉚釘 10、11級　ISO 15978:2002 | GB T 12617.1-2006 | 代替 GBT 12617-1990
Open end blind rivets with break pull mandrel and countersunk head-Property class 10,11

--開口型沉頭抽芯鉚釘 30級　ISO 15980:2002 | GB T 12617.2-2006 | 代替 GBT 12617-1990
Open end blind rivets with break pull mandrel and countersunk head-Property class 30

--開口型沉頭抽芯鉚釘 12級　ISO 15982:2002 | GB T 12617.3-2006 | 代替 GBT 12617-1990
Open end blind rivets with break pull mandrel and countersunk head-Property class 12

--開口型沉頭抽芯鉚釘 51級　ISO 15984:2002 | GB T 12617.4-2006 | 代替 GBT 12617-1990
Open end blind rivets with break pull mandrel and countersunk head-Property class 51

--開口型沉頭抽芯鉚釘 20、21、22級　ISO 16583:2002 | GB T 12617.5-2006 | 代替 GBT 12617-1990
Open end blind rivets with break pull mandrel and countersunk head-Property class 20,21,22

--開口型平圓頭抽芯鉚釘 10、11級　ISO 15977:2002 | GB T 12618.1-2006 | 代替 GBT 12618-1990
Open end blind rivets with break pull mandrel and protruding head-Property class 10,11

--開口型平圓頭抽芯鉚釘 30級　ISO 15979:2002 | GB T 12618.2-2006 | 代替 GBT 12618-1990
Open end blind rivets with break pull mandrel and protruding head-Property class 30

--開口型平圓頭抽芯鉚釘 12級　ISO 15981:2002 | GB T 12618.3-2006 | 代替 GBT 12618-1990
Open end blind rivets with break pull mandrel and protruding head-Property class 12

--開口型平圓頭抽芯鉚釘 51級　ISO 15983:2002 | GB T 12618.4-2006 | 代替 GBT 12618-1990
Open end blind rivets with break pull mandrel and protruding head-Property class 51

--開口型平圓頭抽芯鉚釘 20、21、22級　ISO 16582:2002 | GB T 12618.5-2006 | 代替 GBT 12618-1990
Open end blind rivets with break pull mandrel and protruding head-Property class 20,21,22

--開口型平圓頭抽芯鉚釘 40、41級　ISO 16584:2002 | GB T 12618.6-2006 | 代替 GBT 12618-1990
Open end blind rivets with break pull mandrel and protruding head-Property class 40,41

擋圈

--錐銷鎖緊擋圈　UDC 621.885 | GB 883-86 | 代替 GB883-76
Lock rings with cone pin

--螺釘鎖緊擋圈　UDC 621.885 | GB 884-86 | 代替 GB884-76
Lock ring with screw

--帶鎖圈的螺釘鎖緊擋圈　UDC 621.885 | GB 885-86 | 代替 GB885-76
Lock rings with screw and circlip

--軸肩擋圈　UDC 621.885 | GB 886-86 | 代替 GB886-76
Rings for shoulder

--螺釘緊固軸端擋圈　UDC 621.885 | GB 891-86 | 代替 GB891-76
Lock rings at the end of shaft with screw

--螺栓緊固軸端擋圈　UDC 621.885 | GB 892-86 | 代替 GB892-76
Lock rings at the end of shaft with bolt

--孔用彈性擋圈　GB T 893-2017 | 代替 GBT 893.1-1986, T893.2-1986
Retaining rings for bores

--軸用彈性擋圈　GB T 894-2017 | 代替 GBT 894.1-1986, T 894.2-1986
Retaining rings for shaft

--孔用鋼絲擋圈　UDC 621.885 | GB 895.1-86 | 代替 GB895-76
Roundwire snap rings for hole

--軸用鋼絲擋圈　UDC 621.885 | GB 895.2-86 | 代替 GB895-76
Roundwire snap rings for shaft

--開口擋圈　UDC 621.885 | GB 896-86 | 代替 GB896-76
"E" rings

--鋼絲鎖圈　UDC 621.885 | GB 921-86 | 代替 GB921-76
Round wire circlips

--夾緊擋圈　UDC 621.885 | GB 960-86 | 代替 GB960-76
Grip rings

緊固件-組合件和連接副

--鋼結構用高強度大六角頭螺栓　ISO 7412:1984 | GB T 1228-2006 | 代替 GBT 1228-1991
High strength bolts with large hexagon head for steel structures

--鋼結構用高強度大六角螺母　ISO 4775:1984 | GB T 1229-2006 | 代替 GBT 1229-1991
High strength large hexagon nuts for steel structures

--鋼結構用高強度墊圈　ISO 7416:1984 | GB T 1230-2006 | 代替 GBT 1230-1991
High strength plain washers for steel structures

--鋼結構用高強度大六角頭螺栓、大六角螺母、墊圈技術條件　GB T 1231-2006 | 代替 GBT 1231-1991
Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures

--鋼結構用扭剪型高強度螺栓連接副　GB T 3632-2008 | 代替 GBT 3632~3633-1995
Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures

--螺栓或螺釘和平墊圈組合件　ISO 10644:2009 | GB T 9074.1-2018 | 代替 GBT 9074.1-2002
Bolt or screw and washer assemblies with plain wahsers

--十字槽盤頭螺釘和外鋸齒鎖緊墊圈組合件　UDC 621.882 | GB 9074.2-88 |
Cross recessed pan head screw and serrated lock washer external teeth assemblies

--十字槽盤頭螺釘和彈簧墊圈組合件　UDC 621.882 | GB 9074.3-88 |
Cross recessed pan head screw and single coll spring lock washer assemblies

--十字槽盤頭螺釘、彈簧墊圈和平墊圈組合件　UDC 621.882 | GB 9074.4-88 |
Cross recessed pan head screw, single coll spring lock washer and plain washer assemblies

--十字槽小盤頭螺釘和平墊圈組合件　GB T 9074.5-2004 | 代替 GBT 9074.5-1988, T 9074.6-1988
Cross recessed small pan head screw and washer assemblies with plain washers

--十字槽小盤頭螺釘和彈簧墊圈組合件　UDC 621.882 | GB 9074.7-88 |
Cross recessed small pan head screw and single coll spring lock washer assemblies

--十字槽小盤頭螺釘、彈簧墊圈和平墊圈組合件　UDC 621.882 | GB 9074.8-88 |
Cross recessed small pan head screw, single coil spring lock washer and plain washer assemblies

--十字槽沉頭螺釘和錐形鎖緊墊圈組合件　UDC 621.882 | GB 9074.9-88 |
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies

--十字槽半沉頭螺釘和錐形鎖緊墊圈組合件　UDC 621.882 | GB 9074.10-88 |
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies

--十字槽凹穴六角頭螺栓和平墊圈組合件　UDC 621.882 | GB 9074.11-88 |
Cross recessed hexagon bolt with indentation and plain washer assemblies

--十字槽凹穴六角頭螺栓和彈簧墊圈組合件　UDC 621.882 | GB 9074.12-88 |
Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies

--十字槽凹穴六角頭螺栓、彈簧墊圈和平墊圈組合件　UDC 621.882 | GB 9074.13-88 |
Cross recessed hexagon bolt with indentation, single coil lock washer and plain washer assemblies

--六角頭螺栓和彈簧墊圈組合件　UDC 621.882 | GB 9074.15-88 |
Hexagon head bolt and single coil spring lock washer assemblies

--六角頭螺栓和外鋸齒鎖緊墊圈組合件　UDC 621.882 | GB 9074.16-88 |
Hexagon head bolt and serrated lock washer external teeth assemblies

--六角頭螺栓、彈簧墊圈和平墊圈組合件　UDC 621.882 | GB 9074.17-88 |
Hexagon head bolt, single coil spring lock washer and plain washer assemblies

--自攻螺釘和平墊圈組合件　ISO 10510:2011 | GB T 9074.18-2017 | 代替 GBT 9074.18-2002
Tapping screw and washer assemblies with plain washers

--十字槽凹穴六角頭自攻螺釘和平墊圈組合件　GB T 9074.20-2004 | 代替 GBT 9074.20-1988, T 9074.21-1988
Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers

--組合件用彈簧墊圈　UDC 621.882 | GB 9074.26-88 |
Single coil spring lock washer for assembly

--組合件用外鋸齒鎖緊墊圈　UDC 621.882 | GB 9074.27-88 |
Serrated lock washer external teeth for assembly

--組合件用錐形鎖緊墊圈　UDC 621.882 | GB 9074.28-88 |
Lountersunk external toothed lock washer for assembly

--組合件用錐形彈性墊圈　GB T 9074.31-2017 |
Conical spring washers for assemblies

--螺栓或螺釘和錐形彈性墊圈組合件　GB T 9074.32-2017 |
Bolt or screw and washer assemblies with conical spring washers

--腰狀桿螺柱連接副型式分類　GB T 13807.1-2008 | 代替 GBT 13807.1-1992
Connections with waisted stud-Tape classification

--腰狀桿螺柱連接副螺柱　GB T 13807.2-2008 | 代替 GBT 13807.2-1992
Connections with waisted stud-Studs

--腰狀桿螺柱連接副螺母、受力套管　GB T 13807.3-2008 | 代替 GBT 13807.3-1992
Connections with waisted stud-Nuts, extension sleeves

--混凝土用膨脹型錨栓型式與尺寸　GB T 22795-2008 |
Expansion anchors for use in concrete - Type and dimension

--預載荷高強度栓接結構連接副第1部分：通用要求　GB T 32076.1-2015 |
High-strength structural bolting assemblies for preloading - Part 1:General requirements

--預載荷高強度栓接結構連接副第2部分：預載荷適應性　GB T 32076.2-2015 |
High-strength structural bolting assemblies for preloading - Part 2:Suitability for preloading

--預載荷高強度栓接結構連接副第3部分：HR 型大六角頭螺栓和螺母連接副　GB T 32076.3-2015 |
High-strength structural bolting assemblies for preloading - Part 3:System HR - Hexagon bolt with large width across flats and nut assemblies

--預載荷高強度栓接結構連接副第4部分：HV 型大六角頭螺栓和螺母連接副　GB T 32076.4-2015 |
High-strength structural bolting assemblies for preloading - Part 4:System HV - Hexagon bolt with large width across flats and nut assemblies

--預載荷高強度栓接結構連接副第5部分：平墊圈　GB T 32076.5-2015 |
High-strength structural bolting assemblies for preloading - Part 5:Plain washers

--預載荷高強度栓接結構連接副第6部分：倒角平墊圈　GB T 32076.6-2015 |
High-strength structural bolting assemblies for preloading - Part 6:Plain chamfered washers

--預載荷高強度栓接結構連接副第7部分：M39~M64 大六角頭螺栓和螺母連接副　GB T 32076.7-2015 |
High-strength structural bolting assemblies for preloading - Part 7: M39~M64-Hexagon bolt with large width across flats and nut assemblies

--預載荷高強度栓接結構連接副第8部分：扭剪型圓頭螺栓和螺母連接副　GB T 32076.8-2017 |
High-strength structural bolting assemblies for preloading - Part 8:Torshear type bolt with cup head, and nut assemblies

--預載荷高強度栓接結構連接副第9部分：扭剪型大六角頭螺栓和螺母連接副　GB T 32076.9-2017 |
High-strength structural bolting assemblies for preloading - Part 9:Torshear type bolt with hexagon head with large width across flats,and nut assemblies

--鋼結構用高強度錨栓連接副　GB T 33943-2017 |
High-strength structural anchor bolting assemblies for steel structures

焊釘

--電弧螺柱焊用無頭焊釘　ISO 13918:2008 | GB T 10432.1-2010 |
Unthreaded studs for drawn arc stud welding with ceramic ferrule

--短周期電弧螺柱焊用無頭焊釘　ISO 13918:2008 | GB T 10432.2-2016 |
Unthreaded stud for short - cycle drawn arc stud welding

--儲能焊用無頭焊釘　ISO 13918:2008 | GB T 10432.3-2010 |
Unthreaded studs for capacitor discharge welding

--電弧螺柱焊用圓柱頭焊釘　GB T 10433-2002 | 代替 GBT 10433-1989
Cheese head studs for arc stud welding

配套供貨商：
設備　模具　表面處理　原材料

用戶登錄

用戶名
密　碼
記住用戶名和密碼
免費注冊　忘記密碼
會員服務　廣告服務